D-KTF series the rectangular duct fan is an ideal solution for ventilation systems that require high airflow and high pressure. Thanks to the specific design, these devices guarantee high performance and maximum reliability in operation.
Product information:
D-KTF series radial fans for rectangular ducts are the ideal solution for ducted ventilation systems that require high airflow and high pressure. Thanks to their compact construction, these fans can be installed directly into the air ducts without the need for large deflections (knees) or cross-pieces, in any required position.
The case is made of high-quality galvanized corrosion resistant steel. The fans are radial type with backwards curved blades, which ensures maximum efficiency. A special advantage is service cap, which allows maintenance and servicing of fans without the need for disassembly from the channel network.
The device uses monophasic motors with IP55 the protection and Class F isolation. As an option for all models, the installation of a speed controller for precise operation management is available. The D-KTF series of in-line fans is the right choice for high performance and long-lasting operation without downtime.
Application areas:
Symptoms include retention of odors, visible condensation, overheating, stuffy air, an increased number of absences due to respiratory problems, and poor air quality test results.
The choice of the appropriate type of ventilation depends on the size and layout of the facility, but also on the type of pollutant. Even if you are aware of the importance of air quality and cleanliness, it is advisable to leave the choice of the most efficient and cost-effective solution for removing pollutants to experts.
Proper selection and design of the Air Treatment Unit is the basis of its proper operation and performance of the task. Regular maintenance of the ventilation system and inspections, removal of pollutants, mechanical maintenance of components of the air exchange system, checking of leaks and proper air flows — all contribute to optimal functioning.
The monitoring and automation of the air purification system also helps to keep everything in perfect condition.
The improvement of industrial ventilation improves performance, increases energy efficiency and enables optimal system operation. You can consider using modern filtration systems, more efficient fans and sensors to monitor air quality. Heat recovery systems significantly reduce energy consumption and bring great savings.
In a typical industrial installation, numerous vibrations and oscillations are present created by the ventilation equipment — the operation of fans, Air Treatment Units or refrigeration units. A well-installed channel network should have built-in components that prevent or significantly reduce the transmission of those vibrations. Also, it is useful to familiarize yourself with air flow control systems.
Bringing in fresh air and removing the same amount of polluted air is the basic task of the ventilation system. To achieve this, regulation flaps or airflow regulators are used. Their role is to maintain the desired flow in individual branches of the channel system regardless of changes in pressure within the channel. Depending on the type of ventilation system, modern air volume control systems can be used: VAV (variable air volume) or CAV (constant air volume).
Insulation is used to protect the ventilation system from condensation, fire and to reduce airflow noise. The correct choice of insulation reduces heat losses in the system, and in the event of a fire does not contribute to its spread. Factors that affect proper airflow, such as poorly designed ducts, inadequate-sized ducts, or improperly adjusted valves and fans, can also be optimized.
You can also consider the installation of noise silencers in the ducts, which serve to reduce noise in the ventilation system. They are most often placed between the fan and the diffuser or exhaust fan, as well as before the diffusers themselves. The introduction of a strict maintenance plan — cleaning and replacing filters, ducts and fans — keeps the entire system in its best condition. As you can see, the list of tips for improving industrial ventilation is really long.
In conclusion — the improvement of the ventilation system means that everything will be in line with legal regulations and standards. It is very important to consult with HVAC (heating, ventilation and air conditioning) experts before making any improvements. Remember, everything must be properly calculated and selected to meet your expectations.
ATEX stands for equipment intended for use in explosives. It refers to dangerous or potentially explosive environments.
ATEX certified equipment is approved for safe use in such risky conditions and is usually marked with an Ex symbol.
ATEX fans are specialized industrial fans designed to operate in potentially explosive atmospheres, where the presence of flammable gases, vapors, fog, or dust creates a risk of explosion. They meet strict European ATEX directives and IECEx standards to prevent the formation of sparks or high temperatures that could cause ignition.
Types: there are axial (wall or roof) and centrifugal ATEX fans, adapted for different types of Assembly and air flow.
Certification: equipment must be clearly certified (ATEX designation) for specific hazard zones.
These fans are essential for safety as they extract flammable substances and provide a safe working environment.
How to choose a fan?
In selecting a fan, three key features are:
Additional factors to consider:
Modern fans often come with advanced control panels that allow fine-tuning of operation.
Each industrial application has unique requirements. For example, in mining and Metallurgy it is essential that fans are corrosion resistant, while in the chemical industry key models are resistant to aggressive chemicals. Energy-intensive industries prefer fans with advanced speed controls to provide optimal efficiency with minimal energy consumption.
Storage areas require larger models with high airflow, while smaller devices are needed for more accurate processes, but with more advanced operation control capabilities.
When choosing, think about specific challenges in your work environment:
The answers to these questions will help you narrow the choice and find the ideal solution.
Innovations and accessories: Fan technology is constantly advancing. Modern innovations include:
Additional equipment can significantly extend the functionality of the fan:
Regular maintenance is key to the longevity and efficiency of your device, and it means:
Safety precautions to be taken:
Choosing the right industrial fan can seem like a challenge, but with a few key information it becomes much simpler. Consider the specific needs of your industry, consider factors such as power and airflow, and do not hesitate to invest in quality equipment and accessories.
With the right choice of fans, you will ensure optimal working conditions, increase productivity and reduce long-term costs.
English 
Serbian